Top 10 Best Bowling Strike Rates in an Innings by Australia vs India in ODIs

Australia and India have produced many memorable ODI contests, and the rivalry has featured some remarkable bowling performances from both sides. Bowlers have often changed the direction of matches by taking wickets in quick succession, restricting the scoring rate and putting pressure on the opposition batting order. One of the most useful statistics for measuring how frequently a bowler takes wickets is the bowling strike rate. A lower strike rate means the bowler needs fewer deliveries, on average, to dismiss a batter. The Best Bowling Strike Rates in an Innings by Australia vs India in ODIs therefore highlight some of the fastest wicket-taking spells between these two teams. The ranking below is based on the supplied statistics and includes bowlers who claimed at least four wickets in their respective innings.

List of 10 Best Bowling Strike Rates in an Innings by Australia vs India in ODIs

10. YS Chahal

Yuzvendra Chahal takes the 10th position in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs. The Indian leg-spinner delivered an excellent performance against Australia at the Melbourne Cricket Ground on January 18, 2019. Chahal bowled his complete 10-over spell and conceded 42 runs while taking six wickets. His six dismissals came from 60 deliveries, giving him a bowling strike rate of 10.00.

Chahal’s performance was important because he consistently broke Australia’s batting partnerships. Although he did not bowl a maiden over, his ability to take six wickets made the spell highly effective. His wrist-spin created problems for the Australian batters and helped India gain control of the innings. This performance is a strong example of why Chahal features among the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
10.0	0	42	6	10.00

9. MA Starc

Mitchell Starc occupies ninth place in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs after producing a superb six-wicket performance against India at Melbourne on January 18, 2015. Starc completed 10 overs and conceded 43 runs while taking six wickets. He also bowled two maiden overs during his spell.

Starc needed 60 deliveries to claim his six wickets, giving him a strike rate of 10.00. His pace, swing and ability to attack the stumps made life difficult for India’s batting lineup. The Australian left-arm fast bowler repeatedly created pressure by finding movement and taking important wickets. His performance remains one of the notable spells included in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
10.0	2	43	6	10.00

READ MORE: Top 10 Best Bowling Averages in Australia vs India ODI Matches

8. M Kartik

Murali Kartik is ranked eighth in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs following an outstanding spell against Australia at the Wankhede Stadium on October 17, 2007. Kartik bowled 10 overs and conceded only 27 runs while taking six wickets. He also delivered three maiden overs, showing excellent control.

The Indian left-arm spinner required 60 deliveries to take six wickets, producing a strike rate of 10.00. His ability to combine economical bowling with regular wickets made the spell especially valuable. Australia struggled to score freely against him, while Kartik continued to find breakthroughs throughout his spell. His performance deserves its place among the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
10.0	3	27	6	10.00

7. MA Starc

Mitchell Starc appears for a second time in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs, this time at number seven. He produced another excellent spell against India at Visakhapatnam on March 19, 2023. Starc bowled eight overs and conceded 53 runs while taking five wickets.

His five wickets came from only 48 deliveries, giving him a strike rate of 9.60. Starc’s ability to generate high pace and movement allowed him to dismiss Indian batters at regular intervals. Even though he conceded more runs than in some of his other spells, the speed at which he collected five wickets made the performance highly effective. It is another important entry in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
8.0	1	53	5	9.60

6. AB Agarkar

Ajit Agarkar takes sixth place in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs after recording a memorable six-wicket haul against Australia in Melbourne on January 9, 2004. Agarkar bowled 9.3 overs and conceded 42 runs while dismissing six Australian batters.

He bowled 57 deliveries and collected six wickets, resulting in a strike rate of 9.50. Agarkar also bowled one maiden over during his spell. His pace and ability to find movement allowed him to repeatedly break Australia’s batting partnerships. The performance remains one of India’s strongest wicket-taking spells in the rivalry and deserves a position in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
9.3	1	42	6	9.50

5. RJ Shastri

Ravi Shastri holds fifth place in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs following an impressive bowling performance against Australia at the W.A.C.A. Ground on December 8, 1991. Shastri bowled 6.5 overs and conceded only 15 runs while taking five wickets.

His five wickets came from 41 deliveries, producing a strike rate of 8.20. He also bowled one maiden over, further highlighting his control. Shastri’s spell was particularly impressive because he managed to take wickets quickly while giving Australia very few scoring opportunities. This combination makes his performance an important part of the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs ranking.

Overs	Mdns	Runs	Wkts	SR
6.5	1	15	5	8.20

4. IJ Harvey

Ian Harvey takes fourth place in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs after producing a rapid four-wicket spell against India at Eden Gardens on November 18, 2003. Harvey bowled only 4.5 overs and conceded 21 runs while taking four wickets.

His four wickets came from just 29 deliveries, giving him an impressive strike rate of 7.25. Harvey’s short but highly effective spell allowed Australia to make quick breakthroughs against India’s batting order. He was able to create pressure without needing a long bowling spell, making his performance one of the quickest wicket-taking efforts in the rivalry. His figures place him comfortably among the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
4.5	0	21	4	7.25

3. CJ McKay

Clint McKay is third in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs after delivering a highly effective spell against India at Melbourne on February 5, 2012. McKay bowled 4.4 overs and conceded only 20 runs while taking four wickets.

He needed just 28 deliveries to dismiss four Indian batters, giving him a strike rate of exactly 7.00. His spell was valuable because he managed to take wickets quickly without conceding many runs. McKay’s ability to produce breakthroughs in a short period helped Australia put pressure on India. The performance makes him one of the leading bowlers in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
4.4	0	20	4	7.00

READ MORE: Top 10 Most Dismissals in a Match for Australia vs India in ODIs

2. MG Johnson

Mitchell Johnson takes second place in the Best Bowling Strike Rates in an Innings by an Australian in ODIs vs India, with an exceptional spell at Kuala Lumpur on September 16, 2006. Johnson bowled only four overs and conceded 11 runs while taking four wickets.

His four wickets came from just 24 deliveries, producing a remarkable strike rate of 6.00. Johnson’s pace and movement caused serious problems for India’s batting lineup, while his low run rate added further pressure. Taking four wickets while conceding only 11 runs in four overs made this one of his most efficient performances against India. It also puts Johnson very close to the top of the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs ranking.

Overs	Mdns	Runs	Wkts	SR
4.0	0	11	4	6.00

1. A Symonds

Andrew Symonds holds the number one position in the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs based on the supplied statistics. Symonds produced a remarkable spell against India at Sydney on January 14, 2000. He bowled only 3.3 overs but managed to take four wickets while conceding just 11 runs.

Symonds needed only 21 deliveries to claim his four wickets, giving him an outstanding strike rate of 5.25. His performance stands out because he required fewer than four overs to make a major impact on India’s innings. Taking four wickets in only 21 balls demonstrates just how quickly he was able to change the match. With the lowest strike rate in the supplied list, Symonds leads the Best Bowling Strike Rates in an Innings by Australia vs India in ODIs.

Overs	Mdns	Runs	Wkts	SR
3.3	0	11	4	5.25

The Best Bowling Strike Rates in an Innings by Australia vs India in ODIs feature several outstanding performances from both Australian and Indian bowlers. Andrew Symonds leads the ranking with a remarkable strike rate of 5.25, followed by Mitchell Johnson at 6.00 and Clint McKay at 7.00. Ian Harvey, Ravi Shastri and Ajit Agarkar also produced highly effective spells, while Mitchell Starc appears twice in the top 10.

These performances show that bowling strike rate is an important measure of how quickly a bowler can influence an ODI innings. A lower strike rate indicates that wickets are arriving more frequently, and the bowlers listed here were particularly successful at breaking partnerships and creating pressure. The Best Bowling Strike Rates in an Innings by Australia vs India in ODIs therefore provide a useful record of some of the fastest wicket-taking spells in this long-running ODI rivalry.

FAQs